When deciding which mini implant system to purchase, there are several clinical factors to consider: How easy is it to insert? Can I use the same design in multiple clinical scenarios? Can I use my own traction auxiliaries, or will I need to buy special closing coils or connectors for the mini-implant?
With these considerations in mind, the Infinitas mini implant system has been designed to meet all indications for use and exceed clinical expectations. This manual explains the system’s features, which have made it the choice for many Orthodontists.
Infinitas mini implants and IMT screws are manufactured from Titanium Grade 5 (Ti 6Al-4V) according to ASTM F136, ASTM B348, and ISO 5832-3.
Designed by an Orthodontist, for Orthodontists
The Infinitas mini implant system has been designed with Dr Richard Cousley who has a wealth of experience treating complex cases both as a Consultant Orthodontist in the UK hospital service and in private practice. He has published a landmark textbook on mini-implant anchorage (second edition published in 2020) plus numerous papers on clinical and technical innovations in orthodontic bone anchorage and biomechanics, and lectures widely on the this topic. He developed the Infinitas mini implant system in 2007 in order to achieve a reliable yet relatively simple mini implant system, especially in terms of insertion precision, multi-purpose head features, and ease of use in multiple clinical scenarios.
Unique Head Design for Universal Applications
The head of the Infinitas mini implant is designed for easy and direct attachment of all forms of traction. Auxillaries, such as closing coil springs, elastomeric chain and .021x.025 rectangular wire are held securely on one traction level, in the undercut of this sophisticated low profile head design. In particular there is no need for custom made closing coil springs.
Transmucoasal Neck Design
i) Angled Transmucosal Neck ensuring ease of insertion and patient comfort when inserted at any angle due to the favourable contact between the mucosa and angled neck.
ii) Two neck heights:
- Short neck for areas of thin mucosa.
- Long neck for areas of thick mucosa.
Unique Body Design
i) The unique Infinitas cutting thread continues the full length of the mini implant body and therefore through the cortical bone maximising self-drilling effects and increasing mini implant stability.
ii) The unique tapered design of the 1.5mm diameter mini implant ensures that the coronal end of the body has a diameter of 2mm for optimum engagement of the cortical bone, whilst still permitting easy interproximal placement.
Self Drilling Insertion Technique
All Infinitas mini implants are self drilling, assuring easy insertion and maximum stability. Their self drilling thread avoids the need to pre-drill a full pilot hole. During placement in dense cortical bone excessive torque is avoided with the use of the unique Infinitas cortical punch.
